Driver authorization system is necessary in the field of bulk transport. It is also required in the field of Bulk Fuel Delivery Trucks. The Driver Authorization System designed with the modern wireless hydraulic remote control system is widely popular among the industrial operators. However, there are so many manufacturers who mainly design Driver Authorization Systems specifically for commercial vehicles and machinery. This is a unique system which is used to protect the vehicle from unauthorized engine start or movement depending on the customer's application.
The system generally the following features:
• A keypad Unit is available with hidden enclosure screws
• A sealed parking brake low pressure switch is provided with DOT quick connect T fitting
• Sealed engine kill relay is also available
• All the systems are provided with proper installation guide
• All the components are pre-wired with quick connect electrical and air line fittings supplied.
• Trucks with existing parking brake air pressure switches and engine kill relays. Kill repays are best for radio shut down systems. Kill replays are able to use some of these components
The basic function of the Driver Authorization System is more or less same. The system is generally disarmed by entering a three to nine digit ID code into the keypad. This ID code is considered as unique USER ID codes which is selected by the truck owner and is programmed into the unit using a 'master code' assigned to the truck owner.
All these systems are available with up to three levels of administrative master codes. When a user wants to change the driver’s authorization code he/she needs to enter a master code which is different from the unique USER ID code. These ID codes are provided by the organizations from where the DAS system is purchased. A typical organization will provide these master codes to key management as required.
Each level of master code erases the ID code directly below it and sets the device into a 'learning state' where it is waiting for a new code to be entered. If an incorrect ID code is entered more than five times the system will automatically 'lock out' for ten minutes before allowing additional code entry. LED indicators show red for system armed, green for system disarmed, flashing red for auto shut down, flashing green for changing Id codes, and alternating green and red flashing for system lock out due to multiple incorrect code entry.
Mainly these industrial remote control systems are used as a unique anti-theft tool for commercial or bulk transports. These systems are more unique as they prevent unauthorized engine start. System is armed automatically each time the key is turned off. Entry of correct user code disarms system and allows engine to be started. Used on all types of vehicles and equipment. Attempting to bypass, disable, or damage any Driver Authorization System will cause the ignition to lock out until repairs are made and a valid code entered.
Driver Authorization System is available in four models including: Model DAS1000IGN, Model DAS1000AT, Model DAS1000AB, and Model DAS1000ABT.
BASE Engineering designs excellent industrial remote control systems for different engineering and commercial purposes including butane and propane industry and wireless hydraulic remote control sector. Since 1996 over 50,000 BASE systems have been employed around the globe to increase job safety and productivity. Wireless remote controllers, in our hand, have moved into the next level.
Industrial Remote Control Systems for Bulk Transport