What makes Epoxy paints truly exceptional is their ability to take the beating and still look amazingly good. Whether it’s parking decks, factories, garages or commercial floors, epoxy coating can make any high traffic area look great without any maintenance. The tough epoxy paints are also resistant to chemicals, grease, acids and solvents along with being versatile. Marine epoxies are high performance paints that can provide resistance against corrosive seawater.
However, concrete and metal are the most common surfaces where epoxy coating are applied and the finishing depends on preparation and application techniques. Properly prepared mixture displays superb adhesion whether it is applied by brush, roller or trowel.
Epoxy coating consist of two parts-the base and the curing agent. While storing, these two are kept separate and mixed minutes before the paint is to be applied. The secret of a lustrous and lasting finish lies in the curing process.
After you mix the two together, you have to apply the paint quickly before it dries to the extent that it is rendered useless for further use. Often referred as pot life, the drying time can range from anywhere from 10 minutes to an hour. Drying process between the coatings is called curing and an epoxy application with several coats may take numerous days to fully cure.
The final finish of the epoxy coating is decided by the curing process which should take recommended time in order to be durable and tough. However, in case the curing time is stretched beyond the fixed time, the quality of final finish will suffer.
Ideally, Epoxy paints should be applied within close temperature range of 50 to 90 degrees Fahrenheit, with 65 to 70 degrees taken as perfect applicant temperature. The pot life and curing gets adversely affected when temperature is outside of this range.
Moisture is another important factor that affects the application process. Not only the surface needs to be absolutely dry but atmospheric humidity should also be average. Curing process slows down when the humidity is high but certain additives when added to the mixture allow the paint to be applied in high atmospheric humidity without any damage to the final finish.
Royce is a fully diversified international company which was founded in 1929 to manufacture chemicals for textile industry. Today more than 80 years later, they have a resounding presence across the world and offer solution to diverse needs of chemicals to their customers which also include epoxy. For detailed information, logon to http://www.royceintl.com
What All You Should Know About Epoxy Paint