Water is a basic necessity for survival. Something on which our survival depends needs special care and maintenance. What makes water even more vulnerable is its lack of immunity. Water gets easily contaminated and spreads deadly diseases. That is why cleaning and maintenance of drinking water tanks is highly crucial.
There are three main steps that should be followed in the entire process of maintaining drinking water storage tanks. Inspection of the tank, cleaning the tank and then sterilizing it.
Inspecting the Tank Before commencing the task of cleaning a water tank one must inspect the present condition of the tank. In case of drinking water storage tanks it is essential to check all the pipes and fixtures as well, so that the path that the water follows to reach the consumers is also clean.
During inspection the tank should be empty and the power supply should be turned off. It is advised to hire a professional plumber to do the inspection thoroughly, however, if you are doing it yourself, make sure that you wear safety boots and rubber gloves before getting started.
Cleaning the Tank The material used for cleaning drinking water storage tanks must not have sharp edges because that might cause damage. Make sure that the materials that are being used are clean and disinfected. There are various chemicals available at the market to clean drinking water tanks. Bleaching powder is the most commonly used cleaning agent, it is safe and readily available.
Watch out for the sediments that get deposited at the openings of the pipes and clean them thoroughly as well. Once the cleaning process is over, the tank must be filled and overflowed at least twice to make sure that all the cleaning chemicals are washed away.
Sterilizing the Tank After cleaning the process of sterilization takes place. During sterilization, water is not safe for consumption, thus it is important to block all the outlets of the tank so that no water flows through the pipes. Portable water must be used to fill the tank while required amount of chlorine is added along with the sterilizing chemical. This sterilized water must stay in the tank for at least 24 hours. Clean the tank thoroughly again before opening the pipes and storing water for the users.
The task of regularly cleaning and maintaining could be made easier with a good quality drinking water tank. http://www.joemillars.com has superior quality drinking water storage tanks that will ensure longivity and easier maintanance.
Maintenance of Drinking Water Storage Tanks