CopyPastehas never been so tasty!

Mount Pleasant Roofing Materials That Made History

by tiffanylarsen

  • 0
  • 0
  • 0

Washington, DC is the capital of the United States and rightfully so, with its rich history both in politics and architecture. Buildings and residential properties in neighborhoods like Mount Pleasant still bear the stories of the past in this part of the country. Restoration efforts have been done particularly on the roofs of these structures to keep their glorified appearance intact.

Good thing materials used for roofing in Mount Pleasant and other American neighborhoods in the past are still the ones being used today. These roofing materials have proven to be durable and functional, and able to stand the test of time.

Clay tile
This kind of material has protected people from harsh elements since the 17th century. The first clay tiles were rectangular and flat in shape, and measured 10 by six inches by half an inch. In the earlier times, each tile had to be fastened to the roof by a nail, which explains the two holes on each end. The popularity of the clay tile lasted until the 19th century because of its fire-resistant quality.

Roofing slates came to America from Wales in the middle of the 17th century. However, it was not as widely used as the clay tile because of its cost. The scarcity of inland transportation during that era likewise prevented early Americans from using slate as roof. The slate was seen on Gothic and Mansard style structures in the early19th century; and later still, on Tudor buildings in the 1920s.

Wooden roofs of different styles, size and shapes were on most American homes through every period in history. In the west, shingles were of redwood or red cedar. In the south, wood from oak and cypress trees were made into domes and ceilings. White pine, on the other hand, became the wood of choice for the residents of Delaware Valley and New England.

Lead and copper were two metals used until the 19th century for roofing in Washington, DC and many other areas in the United States. Sheet iron for roofing was popular in the 1700s while tin-plate iron became a trend between 1770 and 1802, with Thomas Jefferson as an avid supporter of tin roofing. For more on this article, check out

Add A Comment: