We are living in the cyber age where everything can be done through technologies. Now technological changes are taking place every minute. Industrial radio controls too are recent developments that are being used in various industrial sectors to maintain and control huge machines.
Trough the utilization of industrial wireless controls system; industrial devices are easily accessed from remote control networks. Literally speaking the total procedure eliminates physical presence and effort at the side. Radio remote controls are really easy to use. These systems offer wider coverage, fast connectivity, safety, increased productivity and cost saving.
In industrial sector now transport leak detection system are absolutely well-accepted and designed for propane, anhydrous ammonia and butane transports. These are certified to comply with all US DOT and Canadian Transport regulations for ‘Passive Shut Off’.
During present time these radio control systems continually monitor the off-loading process looking for a rapid change in discharge pressure. These are easy to use. The systems are so powerful that detect a separated hose or failed connection and close the tank internal valve within 1/2 second.
Now LDS Passive Systems incorporate a functional ‘Test’ button as a way to determine the unit’s readiness. These systems are easy to install and require no calibration or adjustment. The systems activate automatically by opening the internal valve or pipe guard. Basically the options include multi-pipe or multi-trailer sensors, automatic truck engine or PTO shut-down. And the auxiliary control panel available for LDS100 and LSD200 systems to allow drivers’ side unloading control.
There are some specifications of the leak detection LDS60 model system. These are given below;
The system is so powerful that is has low powered micro-computer controlled leak detection and shut down system that has beneficial aspects. The installation system has “Plug & Play” components (2 hrs).
The power ground connection of this system is almost 12 volts DC. The system has intrinsically safe pressure transducer leak detection method system.
The leak detection system has air supply procedure to internal valve for activation system. Not only that the system has 1/4” NPT coupling in pump discharge pipe. The detection capacity is partial and complete hose/pipe separation. The response time is One half (.5) seconds. The system has emergency stop method that closes any or all tank internal valves.
At present, modern manufacturers are improving upon designs and producing unique industrial radio controls. They are using high profile technologies that can take on large loads of work at the same time without compromising on safety in the work field. These are really easy to use. Industrial remote systems work in pretty much the same way as traditional remotes.
Basically when a button is pressed on the device, radio waves are sent to the device to be controlled. These technologies are made with high power specifications. The receiver unit decodes the signal and carries out the command. It’s amazing to know that these industrial wireless controls can be used to receive and send signals from huge distances; they are so powerful that they can even penetrate walls.
BASE Engineering designs excellent industrial wireless controls for different engineering and commercial purposes. Since 1996 over 50,000 BASE systems have been employed around the globe to increase job safety and productivity. As a result of this design effort we have the confidence to offer a four year, no hassle, and replacement warranty on every product we manufacture. Industrial remote controls switch, in our hand, have moved into the next level.
Transport Leak Detection with Industrial Wireless Controls