CopyPastehas never been so tasty!

Industrial Keyboard and OEM Switches for your needs

by ctielectronics

  • 0
  • 0
  • 0
38 views

Industrial Keyboard are designed to deliver exceptional performance, this device is used for controlling heavy machinery. OEM switches also help in functioning of heavy machinery. Read this article which is filled with specifications of OEM Switches and Industrial Keyboard, you would get a better idea about its functioning.

Specifications of OEM Switches

Industrial Switch pad Features

Molded rubber elastomer keys (Gray or Black) rated for 10 million cycles

Keys: 2mm travel with excellent tactile feedback

Legends are silicon ink, oven cured, so as to thermally fuse the ink to the rubber

Optional customized legends or elastomer color

Made in the USA

1) Electrical Power

5VDC, limit current to < 10mA.

Recommend at 5VDC, < 1mA.

2) Environmental Operating Temperature 

Operating Temperature -40ºC to 80º C (standard)

Storage Temperature 

-40ºC to 80º C

Relative Humidity

100% non-condensing (with "Z" option)

3) Sealing & Protection Water Tight

NEMA 4 (IP66)

Protection

Syn-Proof™ coating resists most oils and harsh chemicals Optional Parylene® coating available

4) Reliability MTBF

Greater than 100,000 hours

Life

PCB at recommended power level is 10,000,000+ activations

Syn-Proof™ coated Elastomer is up to 10,000,000 activations

Parylene coated Elastomer is 10,000,000+ activations

Keys

Sealed "Hard" gold plated switch contacts

5) Shock Peak Value

50g

Pulse Duration

11 ms

Waveform

Half Sine

6)Vibration Frequency

5 - 25 Hz

25 - 55 Hz

7)Certifications/Compliance Compliant with FCC class A and B regulations

"CE" classification option requires the following modifications:

Shielded enclosure and shielded cable (made by customer)

Restriction of Hazardous Substances Directive or RoHS Compliant (Pb free)

ESD rated to 15KV

Specifications of Industrial Keyboard:

Features

Two, stainless steel threaded mounting holes (in bottom plate)

Rugged NEMA 4, 4X (IP66) for harsh environments

Keys: 2mm travel with excellent tactile feedback

Repairable design

Gray or Black Elastomer

Plug and Play, Port compatible - no drivers required

Legends are silicon ink, oven cured, so as to thermally fuse the ink to the rubber

Direct factory support

Joystick withstands 25lbs of a static load

No drift pointer design

Made in the USA

Reliability

MTBF (Mean Time between Failures):

Electronics is greater than 100,000 hours

Operating Temperature: -40º to 80º C

Storage Temperature: -40º to 80º C

Shock rating: 50g 11msec. half sine, three axes

Vibration: 10-55 Hz@ 0.013 DA

Elastomer keys: Rated for up to 10 million cycles

Contact Keys: "Hard" gold plated switch contacts. A minimum of 30 to 50 micro inches of Gold over 100 micro inches of Nickel over Copper on switch contacts.

A minimum of 30 to 50 micro inches of Gold over 100 micro inches of Nickel over Copper on switch contacts is used.

NEMA and IP Sealing and Protection Standards

NEMA 4, NEMA 4X (IP66)

Syn-Proof™ coating resists most oils and harsh chemicals

Optional Parylene® coating available

Certifications

Meets FCC Class A

Meets CE Requirements, RoHS Compliant

ESD rated to 15KV

Industrial keyboard and OEM switches therefore prove to be beneficial for industrial purposes. The design and make of these equipment is totally depends on the manufacturer you select.

Add A Comment: