CopyPastehas never been so tasty!

How to clean and easily maintain a sparkling toilet

by anonymous

  • 0
  • 0
  • 0

Many sites and blogs will give tips on how to clean your toilet.  After you’ve cleaned your toilet, a short time after, you have to do it all over again.  If you really neglect cleaning on a regular basis, you can end up with lime deposits, rusts deposits, unsightly ring around the water line and stubborn stains.  With Tekon®’s protective surface sealant, you can make your cleaning efforts last longer by applying Tekon® B to protect the porcelain, making the surface slippery.  With Tekon®’s protective surface sealant, maintaining a sparkling toilet is done easily with .

Tips on cleaning:

  1. Turn off your water line to your toilet and flush to drop the water line


  1. If your water line didn’t drop, then pour 2 – 3 gallons of water into your toilet to drop the water line


  1. Check to see how bad your porcelain is stained



  1. If you don’t see any stains or it your toilet is new, go to Step 4.

                                                               i.      If you see light stains, spray Super Scum Remover and wait 20 minutes, then scrub with a wet 3M Scotch Brite Pad Light Duty Cleansing Pad #7445 in white color until all stains are gone, then go to Step 4.

  1. If you see heavy stains, pour around a quarter size of Glass Luster onto #0000 Steel Pad and scrub stains until all stains are gone.

                                                               i.      The toilet will look black from the steel pad.  Wipe with a microfiber Tek Towel.

                                                             ii.      Spray with Super Scum Remover and wait 2 minutes.  Rinse off with a wet microfiber Applicator Pad.

  1. Spray Empowered Daily and wipe it dry with a microfiber Tek Towel to sterilize the porcelain, removing 99% bacteria and any oily residue.

Tips on protecting:

  1. Pour a small amount of Tekon® B to a microfiber Tek Applicator Pad and cover entire surface of the porcelain, inside and outside and on top of the tank.  Wait 60 – 90 seconds.  Repeat with a 2nd coating of Tekon® B.  Wait 60 – 90 seconds.


  1. Spray Repellant Wash onto the Tekon® B and wipe dry with a microfiber Tek Towel. 


  1. Spray with Super Scum Remover, let it sit a few minutes, wipe off with a wet microfiber Applicator Pad on an as needed basis.


  1. Spray and wipe down with Repellant Wash and a microfiber Tek Towel on an as needed basis.Reapply Tekon® B about every 2 years.

Products Needed: 


  • TEKON® Bath and Glass Sealant Kit: Glass Luster,  Empowered Daily, Tekon B, Repellant Wash, 3M Scotch Brite Pad Light Duty #7445, Tek Towels, microfiber Tek Applicator Pad, Nitrile gloves
  • Super Scum Remover
  • #0000 Steel Pad

For more Details:-

Get all kinds of information about Marble sealer, Marble cleaning products, Shower Glass Cleaner,Kitchen Cleaning Products from You will love to get affordable and effective glass and steel cleaning products.

Add A Comment: