CopyPastehas never been so tasty!

motorola defy dmesg output

by anonymous

  • 0
  • 0
  • 0
3442 views

# uname -a
Linux localhost 2.6.32.9-ga649a2e #1 PREEMPT Thu Jan 20 07:50:55 CST 2011 armv7l GNU/Linux

# cat /proc/driver/musb_hdrc
/proc/driver/musb_hdrc: No such file or directory
#
There's nothing more in /proc/driver than rtc directory

# dmesg
<6>[    0.000000] Initializing cgroup subsys cpu
<5>[    0.000000] Linux version 2.6.32.9-ga649a2e (hudsoncm@il93lnxdroid52) (gcc version 4.4.0 (GCC) ) #1 PREEMPT Thu Jan 20 07:50:55 CST 2011
<4>[    0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c53c7f
<4>[    0.000000] CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
<4>[    0.000000] Machine: mapphone_
<4>[    0.000000] parse_tag_powerup_reason: powerup reason=0x00000010
<4>[    0.000000] Ignoring unrecognised tag 0xf1000402
<4>[    0.000000] Ignoring unrecognised tag 0xf1000403
<4>[    0.000000] Ignoring unrecognised tag 0xf1000404
<4>[    0.000000] Ignoring unrecognised tag 0xf1000405
<4>[    0.000000] Ignoring unrecognised tag 0xf1000406
<6>[    0.000000] parse_tag_mbm_version: mbm_version=0x00000910
<6>[    0.000000] parse_tag_mbm_loader_version: mbm_loader_version=0x00000910
<4>[    0.000000] Ignoring unrecognised tag 0xf1000409
<6>[    0.000000] flat_dev_tree_address=0x89090000, flat_dev_tree_size == 0x00001B72
<4>[    0.000000] Ignoring unrecognised tag 0xf100040b
<4>[    0.000000] Ignoring unrecognised tag 0xf100040c
<4>[    0.000000] Ignoring unrecognised tag 0xf100040d
<6>[    0.000000] parse_tag_battery_status_at_boot: battery_status_at_boot=0x00000001
<4>[    0.000000] Ignoring unrecognised tag 0xf100040f
<4>[    0.000000] Ignoring unrecognised tag 0xf1000410
<4>[    0.000000] Ignoring unrecognised tag 0xf1000411
<4>[    0.000000] Ignoring unrecognised tag 0xf1000412
<4>[    0.000000] Ignoring unrecognised tag 0xf1000413
<4>[    0.000000] Memory policy: ECC disabled, Data cache writeback
<7>[    0.000000] On node 0 totalpages: 127488
<7>[    0.000000] free_area_init_node: node 0, pgdat c05cb664, node_mem_map c069b000
<7>[    0.000000]   Normal zone: 996 pages used for memmap
<7>[    0.000000]   Normal zone: 0 pages reserved
<7>[    0.000000]   Normal zone: 126492 pages, LIFO batch:31
<6>[    0.000000] OMAP3630 ES1.1 (l2cache iva sgx neon isp )
<6>[    0.000000] SRAM: Mapped pa 0x40200000 to va 0xfe400000 size: 0x100000
<6>[    0.000000] Reserving 4194304 bytes SDRAM for VRAM
<4>[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 126492
<5>[    0.000000] Kernel command line: console=/dev/null rw mem=498M@0x80C00000 init=/init ip=off brdrev=P3A androidboot.bootloader=0x0000  mmcparts=mmcblk1:p7(pds),p16(recovery),p17(cdrom),p18(misc),p19(cid),p20(kpanic),p21(system),p22(prek),p23(pkbackup),p24(cache),p25(userdata) androidboot.mode=usb
<6>[    0.000000] boot_mode=usb
<6>[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
<6>[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
<6>[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>[    0.000000] Memory: 498MB = 498MB total
<5>[    0.000000] Memory: 487808KB available (5180K code, 1195K data, 180K init, 0K highmem)
<6>[    0.000000] Hierarchical RCU implementation.
<6>[    0.000000] NR_IRQS:368
<6>[    0.000000] get_omap3630_revision_id: Devtree omap3630-variant 0x36300800
<6>[    0.000000] Clocking rate (Crystal/Core/MPU): 26.0/400/800 MHz
<6>[    0.000000] Reprogramming SDRC clock to 400000000 Hz
<6>[    0.000000] GPMC revision 5.0
<6>[    0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts
<6>[    0.000000] Total of 96 interrupts on 1 active controller
<6>[    0.000000] OMAP GPIO hardware version 2.5
<6>[    0.000000] OMAP clockevent source: GPTIMER1 at 32768 Hz
<6>[    0.000000] Calibrating delay loop... 799.29 BogoMIPS (lpj=3121152)
<4>[    0.000000] Mount-cache hash table entries: 512
<6>[    0.000000] Initializing cgroup subsys cpuacct
<6>[    0.000000] CPU: Testing write buffer coherency: ok
<6>[    0.000000] regulator: core version 0.5
<6>[    0.000000] NET: Registered protocol family 16
<6>[    0.000000] Device tree prop padinit override done
<6>[    0.000000] Device tree prop padwkupsinit override done
<6>[    0.000000] Device tree prop offmodeinit override done
<6>[    0.000000] Device tree prop offmodewkupsinit override done
<6>[    0.000000] GPIO mapping write: pin = 8, name = bt_wake_b
<6>[    0.000000] GPIO mapping write: pin = 22, name = accel1_int
<6>[    0.000000] GPIO mapping write: pin = 23, name = gps_standby
<6>[    0.000000] GPIO mapping write: pin = 28, name = akm8973_reset
<6>[    0.000000] GPIO mapping write: pin = 59, name = gps_reset
<6>[    0.000000] GPIO mapping write: pin = 65, name = wlan_host_wake
<6>[    0.000000] GPIO mapping write: pin = 16, name = als_int
<6>[    0.000000] GPIO mapping write: pin = 99, name = touch_panel_int
<6>[    0.000000] GPIO mapping write: pin = 160, name = gps_interrupt
<6>[    0.000000] GPIO mapping write: pin = 164, name = touch_panel_rst
<6>[    0.000000] GPIO mapping write: pin = 175, name = akm8973_int
<6>[    0.000000] GPIO mapping write: pin = 176, name = power_off
<6>[    0.000000] GPIO mapping write: pin = 15, name = bt_host_wake_b
<6>[    0.000000] GPIO mapping write: pin = 21, name = bt_reset_b
<6>[    0.000000] GPIO mapping write: pin = 182, name = vib_control_en
<6>[    0.000000] GPIO mapping write: pin = 186, name = wlan_reset
<6>[    0.000000] GPIO mapping write: pin = 92, name = lm3530_int
<6>[    0.000000] GPIO mapping write: pin = 93, name = lcd_panel_reset
<6>[    0.000000] GPIO mapping write: pin = 93, name = lm3530_reset
<6>[    0.000000] GPIO mapping write: pin = 92, name = lcd_panel_sd
<6>[    0.000000] GPIO mapping write: pin = 98, name = gpio_cam_reset
<6>[    0.000000] GPIO mapping write: pin = 64, name = gpio_cam_pwdn
<6>[    0.000000] DT overwrite GPIO Mapping done!
<6>[    0.000000] GPIO Mapping init done!
<6>[    0.000000] ram_console: got buffer at 8e000000, size 20000
<6>[    0.000000] ram_console: uncorrectable error in header
<6>[    0.000000] ram_console: no valid data in buffer (sig = 0x2b583562)
<6>[    0.000000] console [ram-1] enabled
<6>[    0.000000] Modem0 is 0x00000000
<6>[    0.000000] CPCAP: overwriting bus_num with 2
<6>[    0.000000] cpcap init size = 4
<6>[    0.000000] CPCAP: Overwrite reg [46] setting!
<6>[    0.000000] CPCAP: Overwrite reg [54] setting!
<6>[    0.000000] CPCAP: Overwrite reg [55] setting!
<6>[    0.000000] CPCAP: Add new reg [156] setting!
<6>[    0.000000] cpcap init size = 8
<6>[    0.000000] CPCAP: Overwrite regulator init [2]!
<6>[    0.000000] CPCAP: Overwrite regulator init [4]!
<6>[    0.000000] CPCAP: Overwrite regulator init [9]!
<6>[    0.000000] CPCAP: Overwrite regulator init [10]!
<6>[    0.000000] CPCAP: Overwrite regulator init [11]!
<6>[    0.000000] CPCAP: Overwrite regulator init [14]!
<6>[    0.000000] CPCAP: Overwrite regulator init [15]!
<6>[    0.000000] CPCAP: Overwrite regulator init [1]!
<6>[    0.000000] cpcap init size = 8
<6>[    0.000000] CPCAP: Overwrite regulator mode [2]!
<6>[    0.000000] CPCAP: Overwrite regulator mode [4]!
<6>[    0.000000] CPCAP: Overwrite regulator mode [9]!
<6>[    0.000000] CPCAP: Overwrite regulator mode [10]!
<6>[    0.000000] CPCAP: Overwrite regulator mode [11]!
<6>[    0.000000] CPCAP: Overwrite regulator mode [18]!
<6>[    0.000000] CPCAP: Overwrite regulator mode [6]!
<6>[    0.000000] CPCAP: Overwrite regulator mode [1]!
<3>[    0.000000] Read property regulator_off_mode error!
<3>[    0.000000] Unable to read node /System@0/Audio@0 from device tree!
<6>[    0.000000] CPCAP: delaying cpcap_usb probe
<6>[    0.000000] CPCAP: delaying cpcap_usb_det probe
<6>[    0.000000] CPCAP: delaying cpcap_audio probe
<6>[    0.000000] CPCAP: delaying cpcap_3mm5 probe
<6>[    0.000000] CPCAP: delaying af-led probe
<6>[    0.000000] CPCAP: delaying bd7885 probe
<6>[    0.000000] CPCAP: delaying ld-keyboard-backlight probe
<3>[    0.000000] Read property button_register2 error!
<6>[    0.000000] CPCAP: delaying ld-button-backlight probe
<6>[    0.000000] CPCAP: delaying flash-torch probe
<6>[    0.000000] CPCAP: delaying notification-led probe
<3>[    0.000000] Unable to get gpio pin num for ipc_bpwake_strobe
<6>[    0.000000] mapphone_als_init:Initializing
<3>[    0.000000] mapphone_isl29030_init - opened node /System@0/I2C@0/Proximity@0 from device tree
<6>[    0.000000] mapphone_isl29030_init - unable to read regulator from device tree
<3>[    0.000000] Unable to get gpio pin num for akm8975_reset
<7>[    0.000000] cannot retrieve akm8975_reset from device tree
<3>[    0.000000] Unable to get gpio pin num for adp8870_reset
<3>[    0.000000] adp8870_reset not in device_tree
<6>[    0.000000] feature_mipi_cam 0
<6>[    0.000000] feature_smart_cam 0
<3>[    0.000000] Unable to get gpio pin num for cam_avdd_en
<6>[    0.000000] Regulators for device: vcam
<6>[    0.000000] Adding vcam to camera                                                 regulator list
<6>[    0.000000] mapphone_camera_init: conventional camera
<3>[    0.000000] Unable to get gpio pin num for touch_pwr_en
<3>[    0.000000] Unable to get gpio pin num for ipc_apwake_trigger
<3>[    0.000000] Read property usb_pids error!
<6>[    0.000000] SIM device enabled.
<3>[    0.000000] omap_init_mbox: platform not supported
<6>[    0.000000] I2C-1 devices: qtouch-obp-ts,lm3530_led,isl29030_als_ir
<6>[    0.000000] qtouch-obp-ts -> I2C bus-1
<6>[    0.000000] lm3530_led -> I2C bus-1
<6>[    0.000000] isl29030_als_ir -> I2C bus-1
<6>[    0.000000] I2C-2 devices: akm8973,lis331dlh,kxtf9
<6>[    0.000000] akm8973 -> I2C bus-2
<6>[    0.000000] lis331dlh -> I2C bus-2
<6>[    0.000000] kxtf9 -> I2C bus-2
<6>[    0.000000] I2C-3 devices: HP_GEN_LENS,lm3554_led,mt9p012,camise
<6>[    0.000000] HP_GEN_LENS -> I2C bus-3
<6>[    0.000000] lm3554_led -> I2C bus-3
<6>[    0.000000] mt9p012 -> I2C bus-3
<6>[    0.000000] camise -> I2C bus-3
<6>[    7.406036] OMAP DMA hardware revision 5.0
<6>[    7.406188] Reserving DMA channels 0 and 1 for HS ROM code
<4>[    7.423339] bio: create slab <bio-0> at 0
<3>[    7.424468] Invalid Console Name
<4>[    7.424682] Invalid console paramter. UART Library Init Failed!
<6>[    7.424774] !!!!!!!! Unable to recongnize Console UART........
<6>[    7.424987] omap-uart.1: ttyS0 at MMIO 0x4806a000 (irq = 72) is a OMAP UART1
<3>[    7.426361] Invalid Console Name
<4>[    7.426544] Invalid console paramter. UART Library Init Failed!
<6>[    7.426666] !!!!!!!! Unable to recongnize Console UART........
<6>[    7.426849] omap-uart.2: ttyS1 at MMIO 0x4806c000 (irq = 73) is a OMAP UART2
<3>[    7.427246] Invalid Console Name
<4>[    7.427337] Invalid console paramter. UART Library Init Failed!
<6>[    7.427551] !!!!!!!! Unable to recongnize Console UART........
<6>[    7.427734] omap-uart.3: ttyS2 at MMIO 0x49020000 (irq = 74) is a OMAP UART3
<6>[    7.433715] regulator: sw5: 5050 mV
<6>[    7.434295] regulator: vusb: 3300 mV
<6>[    7.436401] regulator: vcam: 2900 mV
<6>[    7.438323] regulator: vcsi: 1800 mV
<6>[    7.439331] regulator: vdac: 1800 mV
<6>[    7.441497] regulator: vdig: 1875 mV
<6>[    7.442077] regulator: vfuse: 1500 <--> 3150 mV
<6>[    7.443664] regulator: vhvio: 2775 mV
<6>[    7.444763] regulator: vsdio: 2900 mV
<6>[    7.445861] regulator: vpll: 1800 mV
<6>[    7.447479] regulator: vrf1: 2775 mV
<6>[    7.449249] regulator: vrf2: 2775 mV
<6>[    7.450408] regulator: vrfref: 2775 mV
<6>[    7.450927] regulator: vwlan1: 1800 <--> 1900 mV
<6>[    7.452056] regulator: vwlan2: 3000 mV
<6>[    7.452575] regulator: vsim: 1800 <--> 2900 mV
<6>[    7.453216] regulator: vsimcard: 1800 <--> 2900 mV
<6>[    7.453765] regulator: vvib: 1300 <--> 3000 mV
<6>[    7.455352] regulator: vaudio: 2775 mV normal standby
<6>[    7.456298] cpcap_uc cpcap_uc: firmware: using built-in firmware cpcap/firmware_1_2x.fw
<6>[    7.456512] cpcap_uc cpcap_uc: Loading 714 word(s) at 0x9130
<6>[    7.631408] cpcap_uc cpcap_uc: Loading 1 word(s) at 0x9018
<6>[    7.637176] cpcap_uc cpcap_uc: Loaded Sec SPI Init = 1: 0
<6>[    7.637329] cpcap_uc cpcap_uc: Started macro 4: 0
<6>[    7.652038] cpcap_adc cpcap_adc: CPCAP ADC device probed
<6>[    7.652740] cpcap spi2.0: Probing CPCAP device cpcap_usb
<6>[    7.653015] cpcap spi2.0: Probing CPCAP device cpcap_usb_det
<6>[    7.653350] cpcap spi2.0: Probing CPCAP device cpcap_audio
<6>[    7.653625] cpcap spi2.0: Probing CPCAP device cpcap_3mm5
<6>[    7.653991] cpcap spi2.0: Probing CPCAP device af-led
<6>[    7.654235] cpcap spi2.0: Probing CPCAP device bd7885
<6>[    7.654602] cpcap spi2.0: Probing CPCAP device ld-keyboard-backlight
<6>[    7.654876] cpcap spi2.0: Probing CPCAP device ld-button-backlight
<6>[    7.655212] cpcap spi2.0: Probing CPCAP device flash-torch
<6>[    7.655487] cpcap spi2.0: Probing CPCAP device notification-led
<6>[    7.656646] cpcap_usb cpcap_usb: Initialized CPCAP USB module
<6>[    7.657287] usbcore: registered new interface driver usbfs
<6>[    7.657806] usbcore: registered new interface driver hub
<6>[    7.658111] usbcore: registered new device driver usb
<6>[    7.658691] i2c_omap i2c_omap.1: bus 1 rev4.0 at 400 kHz
<6>[    7.667663] i2c_omap i2c_omap.2: bus 2 rev4.0 at 400 kHz
<6>[    7.683166] i2c_omap i2c_omap.3: bus 3 rev4.0 at 400 kHz
<6>[    7.687622] Bluetooth: Core ver 2.15
<6>[    7.687927] NET: Registered protocol family 31
<6>[    7.688140] Bluetooth: HCI device and connection manager initialized
<6>[    7.688232] Bluetooth: HCI socket layer initialized
<6>[    7.688751] Switching to clocksource 32k_counter
<6>[    7.690551] musb_hdrc: version 6.0, musb-dma, peripheral, debug=0
<7>[    7.690856] musb_hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine (X), bulk split (X), HB-ISO Rx, HB-ISO Tx, SoftConn)
<7>[    7.691375] musb_hdrc: MHDRC RTL version 1.800
<7>[    7.691467] musb_hdrc: setup fifo_mode 4
<7>[    7.691680] musb_hdrc: 28/31 max ep, 14536/16384 memory
<6>[    7.691802] musb_hdrc: USB Peripheral mode controller at fa0ab000 using DMA, IRQ 92
<6>[    7.692443] NET: Registered protocol family 2
<6>[    7.692687] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
<6>[    7.693237] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
<6>[    7.693603] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
<6>[    7.693939] TCP: Hash tables configured (established 16384 bind 16384)
<6>[    7.694061] TCP reno registered
<6>[    7.694366] NET: Registered protocol family 1
<6>[    7.694641] Trying to unpack rootfs image as initramfs...
<6>[    7.706268] Freeing initrd memory: 164K
<6>[    7.708221] dspbridge_init: 600000 bytes @ 81b00000
<6>[    7.708557] Keypadreset init failed
<4>[    7.709136] mapphone_wifi_init: start
<6>[    7.709442] gpio_dev_size = 7
<6>[    7.709533] GPIODev: Overwrite device [gps_reset] setting!
<6>[    7.709747] GPIODev: Overwrite device [gps_standby] setting!
<6>[    7.709838] GPIODev: Overwrite device [gps_interrupt] setting!
<6>[    7.710052] GPIODev: Add new device [bt_reset_b] setting!
<6>[    7.710144] GPIODev: Add new device [bt_wake_b] setting!
<6>[    7.710327] GPIODev: Add new device [lcd_panel_reset] setting!
<6>[    7.710449] GPIODev: Add new device [lm3530_reset] setting!
<6>[    7.711059] omap-iommu omap-iommu.0: isp registered
<6>[    7.723846] ashmem: initialized
<5>[    7.724365] VFS: Disk quotas dquot_6.5.2
<4>[    7.724639] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
<4>[    7.725799] yaffs Jan 20 2011 07:50:32 Installing.
<6>[    7.726013] msgmni has been set to 953
<6>[    7.729125] alg: No test for stdrng (krng)
<6>[    7.729309] io scheduler noop registered
<6>[    7.729583] io scheduler cfq registered (default)
<6>[    7.733459] GPIODev init successfully
<3>[    7.734802] sr_recalibrate: 2:1 autocomp was disabled
<6>[    7.744750] brd: module loaded
<6>[    7.749053] loop: module loaded
<6>[    7.798889] Android kernel panic handler initialized (bind=kpanic)
<6>[    7.800323] input: compass as /devices/virtual/input/input0
<6>[    7.801116] AK8975 compass driver: init
<6>[    7.801391] <6>LIS331DLH accelerometer driver
<3>[    7.876647] lis331dlh 2-0019: write transfer error
<3>[    7.954772] lis331dlh 2-0019: write transfer error
<3>[    7.954895] lis331dlh 2-0019: soft power off failed
<4>[    7.955169] lis331dlh: probe of 2-0019 failed with error -5
<6>[    7.955474] kxtf9 accelerometer driver
<6>[    8.103546] input: accelerometer as /devices/virtual/input/input1
<6>[    8.104187] kxtf9 2-000f: kxtf9 probed
<6>[    8.107879] ts27010 mux registered
<3>[    8.108825] vib-pwm: vib_pwm_init
<6>[    8.109222] Android kernel panic mmc handler initialized
<6>[    8.110443] Syspanic cannot get wrigley mbox
<6>[    8.110656] Loaded SysPanic device driver
<6>[    8.110809] Driver for moto tcmd related part - init.
<6>[    8.112304] input: cpcap-key as /devices/virtual/input/input2
<6>[    8.112548] cpcap_key cpcap_key: CPCAP key device probed
<3>[    8.113311] regulator_check_voltage: operation not allowed for vaudio
<6>[    8.114318] cpcap spi2.0: Headset key event: old=0, new=0
<6>[    8.114532] cpcap spi2.0: New headset state: 0
<6>[    8.115295] omap2-nand driver initializing
<6>[    8.115722] PPP generic driver version 2.4.2
<6>[    8.116394] PPP Deflate Compression module registered
<6>[    8.116516] PPP BSD Compression module registered
<6>[    8.117553] PPP MPPE Compression module registered
<6>[    8.117797] NET: Registered protocol family 24
<5>[    8.117919] usbmon: debugfs is not available
<6>[    8.118133] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
<4>[    8.118347] IRQ 78/usbtll: IRQF_DISABLED is not guaranteed on shared IRQs
<6>[    8.119018] ehci-omap ehci-omap.0: OMAP-EHCI Host Controller
<6>[    8.119323] ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 1
<6>[    8.119842] ehci-omap ehci-omap.0: irq 77, io mem 0x48064800
<6>[    8.134368] ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00
<6>[    8.135192] usb usb1: configuration #1 chosen from 1 choice
<6>[    8.135650] hub 1-0:1.0: USB hub found
<6>[    8.135833] hub 1-0:1.0: 3 ports detected
<6>[    8.136688] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
<6>[    8.137451] usbcore: registered new interface driver cdc_acm
<6>[    8.137573] cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
<6>[    8.138244] usbcore: registered new interface driver usbserial
<6>[    8.138366] usbserial: USB Serial Driver core
<6>[    8.138641] USB Serial support registered for moto-modem
<6>[    8.138946] usbcore: registered new interface driver moto-modem
<6>[    8.139312] USB Serial support registered for QSC 6085 Modem Driver
<6>[    8.139617] usbcore: registered new interface driver cdma-modem
<6>[    8.140014] USB Serial support registered for moto-flashqsc
<6>[    8.140319] usbcore: registered new interface driver moto-flashqsc
<6>[    8.140808] usbcore: registered new interface driver usb_ipc_data
<6>[    8.141052] android init
<6>[    8.141265] android_probe pdata: c057ee20
<6>[    8.141601] android_bind
<7>[    8.141723] android_bind_config
<6>[    8.141967] android_usb gadget: android_usb ready
<6>[    8.142761] f_usbnet init
<6>[    8.142883] android_register_function usbnet
<6>[    8.143096] f_adb init
<6>[    8.143218] android_register_function adb
<6>[    8.143341] f_mass_storage init
<6>[    8.143463] android_register_function usb_mass_storage
<6>[    8.143707] f_mtp init
<6>[    8.143829] android_register_function mtp
<6>[    8.143920] f_acm init
<6>[    8.144165] android_register_function acm
<6>[    8.144287] f_rndis init
<6>[    8.144683] android_register_function rndis
<6>[    8.144927] Gadget Usb: ACM Bind Config
<6>[    8.145568] Gadget USB: usbnet_bind_config
<6>[    8.146850] Gadget Usb: mtp_bind_config
<6>[    8.147613] rndis_function_bind_config MAC: 02:7F:42:40:30:31
<4>[    8.147766] android_usb gadget: using random self ethernet address
<4>[    8.148010] android_usb gadget: using random host ethernet address
<6>[    8.148651] usb1: MAC ae:24:3f:e1:f1:b8
<6>[    8.148895] usb1: HOST MAC f6:3a:75:bd:f6:4f
<6>[    8.149261] Gadget Usb: mass_storage_bind_config
<6>[    8.149688] fsg_probe pdata: c057ee48
<6>[    8.151031] android_usb gadget: Number of LUNs=1
<6>[    8.151184] Gadget Usb: adb_bind_config
<6>[    8.153076] qtouch_force_reset: Forcing HW reset
<3>[    8.153320] Unable to get gpio pin num for touch_pwr_en
<6>[    8.267700] qtouch_process_info_block: Build version is 0x10
<6>[    8.268371] qtouch_process_info_block: Object 5 @ 0x00f2 (9) insts 1 rep_ids 0
<6>[    8.268951] qtouch_process_info_block: Object 6 @ 0x00fb (6) insts 1 rep_ids 1
<6>[    8.269622] qtouch_process_info_block: Object 38 @ 0x0101 (8) insts 1 rep_ids 0
<4>[    8.269866] qtouch_process_info_block: Unknown object type (38) encountered
<6>[    8.270446] qtouch_process_info_block: Object 7 @ 0x0109 (3) insts 1 rep_ids 0
<6>[    8.271118] qtouch_process_info_block: Object 8 @ 0x010c (8) insts 1 rep_ids 0
<6>[    8.271789] qtouch_process_info_block: Object 9 @ 0x0114 (31) insts 1 rep_ids 10
<6>[    8.272369] qtouch_process_info_block: Object 15 @ 0x0133 (11) insts 1 rep_ids 1
<6>[    8.273071] qtouch_process_info_block: Object 18 @ 0x013e (2) insts 1 rep_ids 0
<6>[    8.273742] qtouch_process_info_block: Object 19 @ 0x0140 (16) insts 1 rep_ids 1
<6>[    8.274322] qtouch_process_info_block: Object 20 @ 0x0150 (12) insts 1 rep_ids 1
<6>[    8.274993] qtouch_process_info_block: Object 22 @ 0x015c (17) insts 1 rep_ids 1
<6>[    8.275634] qtouch_process_info_block: Object 23 @ 0x016d (15) insts 1 rep_ids 1
<6>[    8.276214] qtouch_process_info_block: Object 24 @ 0x017c (19) insts 1 rep_ids 4
<6>[    8.276885] qtouch_process_info_block: Object 25 @ 0x018f (14) insts 1 rep_ids 1
<6>[    8.277465] qtouch_process_info_block: Object 27 @ 0x019d (7) insts 1 rep_ids 1
<6>[    8.278045] qtouch_process_info_block: Object 28 @ 0x01a4 (6) insts 1 rep_ids 1
<6>[    8.278717] qtouch_process_info_block: Object 37 @ 0x0070 (130) insts 1 rep_ids 0
<4>[    8.279205] qtouch_process_info_block: Checksum mismatch (0x00001e90 != 0x008c2755)
<6>[    8.279418] qtouch_process_info_block: qtouch-obp-ts found. family 0x80, variant 0x3, ver 0x10, build 0xab, matrix 18x12, 17 objects.
<6>[    8.279663] qtouch_ts_probe: FW version is 0x10 Build 0xAB
<6>[    8.280487] input: qtouch-touchscreen as /devices/virtual/input/input3
<6>[    8.281555] GPIO Matrix Keypad Driver: Start keypad matrix for sholes-keypad in interrupt mode
<6>[    8.281829] GPIO Input Driver: Start gpio inputs for sholes-keypad in interrupt mode
<6>[    8.282348] do_cmd_proc_msg:EEPROM checksum mismatch 0x  EAE02C
<6>[    8.282470] qtouch_hw_init: Doing hw init
<6>[    8.283142] input: sholes-keypad as /devices/virtual/input/input4
<6>[    8.286407] input: proximity as /devices/virtual/input/input5
<6>[    8.287292] input: als as /devices/virtual/input/input6
<6>[    8.290985] qtouch_force_calibration: Forcing calibration
<6>[    8.309234] using rtc device, cpcap_rtc, for alarms
<6>[    8.309417] cpcap_rtc cpcap_rtc: rtc core: registered cpcap_rtc as rtc0
<6>[    8.310546] i2c /dev entries driver
<6>[    8.311767] Linux video capture interface: v2.00
<6>[    8.312072] mt9p012 driver loading
<3>[    8.312988] failed mipi dli register/probe -19
<6>[    8.314270] hp3a hp3a-omap: Registered hp3a driver.
<6>[    8.314666] omap-iommu omap-iommu.0: isp: version 1.1
<6>[    8.315032] isp_tmp_buf_alloc: allocating 16777216 bytes
<6>[    8.419830] omap3isp omap3isp: Revision 15.0 found
<7>[    8.421234] tda19989_probe
<6>[    8.425750] Driver for 1-wire Dallas network protocol.
<6>[    8.426605] omap_hdq omap_hdq.0: OMAP HDQ Hardware Rev 0.5. Driver in Interrupt mode
<3>[    8.618774] omap_hdq omap_hdq.0: break wait elapsed
<6>[    8.619659] w1_master_driver w1 bus master: Family 89 for 89.000000000000.5b is not registered.
<6>[    8.621765] OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec
<6>[    8.622619] Watchdog auto-pet enabled at 45 sec intervals
<6>[    8.623199] device-mapper: uevent: version 1.0.3
<6>[    8.623901] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
<6>[    8.624206] Bluetooth: HCI UART driver ver 2.2
<6>[    8.624328] Bluetooth: HCI H4 protocol initialized
<6>[    8.624450] Bluetooth: HCILL protocol initialized
<6>[    8.625122] cpuidle: using governor ladder
<6>[    8.625244] cpuidle: using governor menu
<6>[    8.627197] cpcap_bd7885_probe:CPCAP Probe enter
<6>[    8.627441] cpcap_bd7885_probe:CPCAP probe exit
<6>[    8.628112] BU9847 i2c driver : init is completed.
<6>[    8.628692] Registered led device: af-led
<6>[    8.629272] Registered led device: button-backlight
<6>[    8.629852] Registered led device: red
<6>[    8.630279] Registered led device: green
<6>[    8.630584] Registered led device: blue
<6>[    8.631256] Registered led device: keyboard-backlight
<6>[    8.632446] input: lm3530_led as /devices/virtual/input/input7
<6>[    8.634704] Registered led device: lcd-backlight
<6>[    8.635437] cpcap_lm3554_probe:CPCAP Probe enter
<6>[    8.641815] Registered led device: torch-flash
<6>[    8.642608] Registered led device: spotlight
<6>[    8.642761] LM3554 torch initialized
<6>[    8.643035] cpcap_lm3554_probe:CPCAP torch probe exit
<6>[    8.645019] usbcore: registered new interface driver usbhid
<6>[    8.645141] usbhid: v2.6:USB HID core driver
<6>[    8.646148] logger: created 64K log 'log_main'
<6>[    8.646514] logger: created 256K log 'log_events'
<6>[    8.646850] logger: created 64K log 'log_radio'
<6>[    8.647277] logger: created 64K log 'log_system'
<4>[    8.651031] Netfilter messages via NETLINK v0.30.
<4>[    8.651367] nf_conntrack version 0.5.0 (7631 buckets, 30524 max)
<4>[    8.651763] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
<4>[    8.652008] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
<4>[    8.652221] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
<4>[    8.652465] ctnetlink v0.93: registering with nfnetlink.
<6>[    8.652801] xt_time: kernel timezone is -0000
<6>[    8.653198] ip_tables: (C) 2000-2006 Netfilter Core Team
<6>[    8.653442] arp_tables: (C) 2002 David S. Miller
<6>[    8.653747] TCP cubic registered
<6>[    8.653869] Initializing XFRM netlink socket
<6>[    8.654296] NET: Registered protocol family 10
<6>[    8.655059] lo: Disabled Privacy Extensions
<6>[    8.655639] Mobile IPv6
<6>[    8.655761] IPv6 over IPv4 tunneling driver
<6>[    8.656829] sit0: Disabled Privacy Extensions
<6>[    8.657653] ip6tnl0: Disabled Privacy Extensions
<6>[    8.658355] NET: Registered protocol family 17
<6>[    8.658508] NET: Registered protocol family 15
<6>[    8.658660] Bluetooth: L2CAP ver 2.14
<6>[    8.658905] Bluetooth: L2CAP socket layer initialized
<6>[    8.659027] Bluetooth: SCO (Voice Link) ver 0.6
<6>[    8.659240] Bluetooth: SCO socket layer initialized
<6>[    8.659576] Bluetooth: RFCOMM TTY layer initialized
<6>[    8.659729] Bluetooth: RFCOMM socket layer initialized
<6>[    8.659942] Bluetooth: RFCOMM ver 1.11
<6>[    8.660064] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
<6>[    8.660278] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
<6>[    8.661254] OMAP DSS rev 2.0
<6>[    8.661468] OMAP DISPC rev 3.0
<6>[    8.661895] OMAP DSI rev 1.0
<6>[    8.728424] mmc1 set to BYTE mode
<4>[    8.729949] mmc1: CSD structure version decoded in EXT_CSD
<6>[    8.743804] mmc1: new high speed MMC card at address 0001
<6>[    8.744750] mmcblk1: mmc1:0001 SEM02G 1.82 GiB
<6>[    8.745269]  mmcblk1: p1 p2 p3 p4 < p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 >
<4>[    8.753784] mmcblk1: p25 size 30173184 exceeds device capacity, limited to end of disk
<6>[    8.758331] mmc_blk_probe: adding mmcblk1p20:kpanic
<3>[    8.760009] apanic: Bound to mmc block device 'mmcblk1p20(179:52)'
<6>[    8.760162] apanic: No panic data available
<6>[    8.798980] qtouch_force_calibration: Forcing calibration
<6>[    8.799438] do_cmd_proc_msg: Reset done.
<6>[    8.799560] do_cmd_proc_msg: Self-calibration started.
<7>[    8.821868] DT: width= 480 height= 854
<7>[    8.821990] DT: hfp=0 hsw=2 hbp=2 vfp=0 vsw=1 vbp=1
<7>[    8.822235] DT: clk_lane=1 clk_pos=0  data1_lane=2 data1_pos=0
<7>[    8.822357] DT: data2_lane= 3 data2_pos= 0 xfer_mode= 0
<7>[    8.822601] DT: gpio_reset=136 panel_id=0x1a0001 te_scan_line=0x300
<7>[    8.822723] DT: regn=13 regm=173 regm3=5 regm4=5 lp_clk_div=7 lck_div=1 pck_div=5
<6>[    8.833496] qtouch_hw_init: Doing hw init
<6>[    8.840667] qtouch_force_calibration: Forcing calibration
<6>[    8.872406] te_scan_line is set = 768
<6>[    8.892120] done EDISCO CTRL ENABLE
<4>[    9.115020] plane 1, # of overlays: 3
<4>[    9.116394] plane 2, # of overlays: 3
<2>[    9.117797] omap_is_SEC: fab_id = 1, it is UMC OMAP3630 Silicon
<3>[    9.117919] Power Management for TI OMAP3.
<6>[    9.123596]
<6>[    9.123596] MAPPHONE PMIC SR init...
<6>[    9.123901] SR1 : Fused Nvalues for 3 OPP
<6>[    9.124114] VDD1 - OPP4 -  1G Nvalue = 0xAA9388
<6>[    9.124237] VDD1 - OPP3 - 800 Nvalue = 0xAABEA9
<6>[    9.124359] VDD1 - OPP2 - 600 Nvalue = 0x9A82E6
<6>[    9.124603] VDD1 - OPP1 - 300 Nvalue = 0x99D5BB
<6>[    9.124908] SR2 : Fused Nvalues for 2 OPP
<6>[    9.125122] VDD2 - OPP2 - 200 Nvalue = 0x9A89ED
<6>[    9.125244] VDD2 - OPP1 - 100 Nvalue = 0x99EAC7
<4>[    9.125488] SR: debugfs_create_file failed
<6>[    9.125701] SmartReflex driver initialized
<7>[    9.125823] Disabling unused clock "sr2_fck"
<7>[    9.125976] Disabling unused clock "sr1_fck"
<7>[    9.126190] Disabling unused clock "gpt2_ick"
<7>[    9.126312] Disabling unused clock "gpt3_ick"
<7>[    9.126678] Disabling unused clock "gpt4_ick"
<7>[    9.126800] Disabling unused clock "gpt5_ick"
<7>[    9.126922] Disabling unused clock "gpt6_ick"
<7>[    9.127166] Disabling unused clock "gpt7_ick"
<7>[    9.127288] Disabling unused clock "gpt8_ick"
<7>[    9.127410] Disabling unused clock "gpt9_ick"
<7>[    9.127624] Disabling unused clock "gpio2_dbck"
<7>[    9.127746] Disabling unused clock "gpio3_dbck"
<7>[    9.127990] Disabling unused clock "gpio4_dbck"
<7>[    9.128112] Disabling unused clock "gpio5_dbck"
<7>[    9.128234] Disabling unused clock "gpio6_dbck"
<7>[    9.128448] Disabling unused clock "gpt9_fck"
<7>[    9.128570] Disabling unused clock "gpt8_fck"
<7>[    9.128814] Disabling unused clock "gpt7_fck"
<7>[    9.128936] Disabling unused clock "gpt6_fck"
<7>[    9.129058] Disabling unused clock "gpt5_fck"
<7>[    9.129272] Disabling unused clock "gpt4_fck"
<7>[    9.129394] Disabling unused clock "gpt3_fck"
<7>[    9.129638] Disabling unused clock "gpt2_fck"
<7>[    9.129760] Disabling unused clock "gpt12_ick"
<7>[    9.129882] Disabling unused clock "wdt1_ick"
<7>[    9.130096] Disabling unused clock "usim_ick"
<7>[    9.130218] Disabling unused clock "gpio1_dbck"
<7>[    9.130340] Disabling unused clock "usim_fck"
<7>[    9.130584] Disabling unused clock "rng_ick"
<7>[    9.130706] Disabling unused clock "ssi_ick"
<7>[    9.130920] Disabling unused clock "mcbsp_ick"
<7>[    9.131072] Disabling unused clock "mcbsp_ick"
<7>[    9.131195] Disabling unused clock "gpt10_ick"
<7>[    9.131408] Disabling unused clock "gpt11_ick"
<7>[    9.131530] Disabling unused clock "mspro_ick"
<7>[    9.131774] Disabling unused clock "des2_ick"
<7>[    9.131896] Disabling unused clock "sha12_ick"
<7>[    9.132019] Disabling unused clock "aes2_ick"
<7>[    9.132232] Disabling unused clock "icr_ick"
<7>[    9.132354] Disabling unused clock "ssi_ssr_fck"
<7>[    9.132507] Disabling unused clock "mcbsp_fck"
<7>[    9.132720] Disabling unused clock "mcbsp_fck"
<7>[    9.132843] Disabling unused clock "mspro_fck"
<7>[    9.133087] Disabling unused clock "gpt11_fck"
<7>[    9.133209] Disabling unused clock "gpt10_fck"
<7>[    9.133331] Disabling unused clock "modem_fck"
<7>[    9.133575] Disabling unused clock "dpll4_m6x2_ck"
<7>[    9.133697] Disabling unused clock "dpll3_m3x2_ck"
<7>[    9.133941] Disabling unused clock "sys_clkout1"
<3>[    9.134582] sr_recalibrate: 2:2 autocomp was disabled
<6>[    9.135009] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
<3>[    9.137176] regulator_check_voltage: operation not allowed for vusb
<6>[    9.138000] cpcap_usb_det cpcap_usb_det: CPCAP USB detection device probed
<6>[    9.142639] cpcap_rtc cpcap_rtc: setting system clock to 2011-02-20 14:04:21 UTC (1298210661)
<6>[    9.142944] mapphone_camera_reg_power - enable vcam
<6>[    9.157806] usb 1-3: new high speed USB device using ehci-omap and address 2
<4>[    9.158020] mmc0: host does not support reading read-only switch. assuming write-enable.
<6>[    9.158264] mmc0: new high speed SDHC card at address b368
<6>[    9.158843] mmcblk0: mmc0:b368 NCard 7.46 GiB
<6>[    9.159271]  mmcblk0: p1
<3>[    9.204833] mt9p012 3-0036: Unable to detect sensor
<6>[    9.220245] mapphone_camera_reg_power - disable vcam
<6>[    9.220581] mapphone_camera_reg_power - enable vcam
<6>[    9.251831] cpcap spi2.0: notify_accy: accy=0
<6>[    9.252990] musb_pullup - Disabling USB Pullups
<3>[    9.282958] mt9p012 3-0036: Unable to detect sensor
<6>[    9.298400] mapphone_camera_reg_power - disable vcam
<6>[    9.298645] mapphone_camera_reg_power - enable vcam
<6>[    9.315704] usb 1-3: configuration #1 chosen from 1 choice
<6>[    9.316955] IPC DMA: ch8 for read, ch7 for write
<6>[    9.345428] qtouch_force_reset: Forcing HW reset
<3>[    9.345642] Unable to get gpio pin num for touch_pwr_en
<3>[    9.361083] mt9p012 3-0036: Unable to detect sensor
<6>[    9.376525] mapphone_camera_reg_power - disable vcam
<6>[    9.376800] mapphone_camera_reg_power - enable vcam
<3>[    9.439147] mt9p012 3-0036: Unable to detect sensor
<6>[    9.454559] mapphone_camera_reg_power - disable vcam
<6>[    9.455902] HP_GEN_LENS 3-0004: lens probe called....
<6>[    9.456359] video4linux video0: video0 is now omap3//hplens/
<6>[    9.456542] mapphone_camera_reg_power - enable vcam
<6>[    9.497833] do_cmd_proc_msg:EEPROM checksum mismatch 0x  EAE02C
<6>[    9.497924] qtouch_hw_init: Doing hw init
<6>[    9.505706] qtouch_force_calibration: Forcing calibration
<3>[    9.517242] mt9p012 3-0036: Unable to detect sensor
<6>[    9.532684] mapphone_camera_reg_power - disable vcam
<3>[    9.532989] Registered hplens as V4L2 device.
<6>[    9.533294] camise_probe
<7>[    9.533477] camise_sensor_power_set: power on
<6>[    9.533660] cam_reset_gpio 98
<6>[    9.533752] cam_standby_gpio 64
<6>[    9.556213] mapphone_camera_reg_power - enable vcam
<7>[    9.684478] camise_sensor_power_set: power off
<6>[    9.696746] mapphone_camera_reg_power - disable vcam
<6>[    9.697235] camera_misc_probe - probe function called
<6>[    9.697357] fun camera_misc_probe gpio_cam_reset=98 gpio_cam_pwdn=64
<6>[    9.697875] camise Sensor detected
<6>[    9.698303] video4linux video3: video3 is now omap3/camise//
<6>[    9.698455] mapphone_camera_reg_power - enable vcam
<3>[    9.728118] Failed to req cam standby
<3>[    9.743896] mt9p012 3-0036: Unable to detect sensor
<6>[    9.759338] mapphone_camera_reg_power - disable vcam
<6>[    9.759796] Freeing init memory: 180K
<4>[    9.759948] Warning: unable to open an initial console.
<6>[    9.880249] keychord: using input dev sholes-keypad for fevent
<4>[    9.885009] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
<6>[    9.885345] kjournald starting.  Commit interval 5 seconds
<6>[   10.009979] qtouch_force_calibration: Forcing calibration
<6>[   10.010437] do_cmd_proc_msg: Reset done.
<6>[   10.010559] do_cmd_proc_msg: Self-calibration started.
<6>[   10.027252] EXT3 FS on mmcblk1p21, internal journal
<6>[   10.027465] EXT3-fs: mounted filesystem with ordered data mode.
<6>[   12.711303] kjournald starting.  Commit interval 5 seconds
<6>[   12.713134] EXT3 FS on mmcblk1p25, internal journal
<6>[   12.713439] EXT3-fs: mounted filesystem with ordered data mode.
<6>[   12.878112] kjournald starting.  Commit interval 5 seconds
<6>[   12.879364] EXT3 FS on mmcblk1p24, internal journal
<6>[   12.879577] EXT3-fs: mounted filesystem with ordered data mode.
<6>[   12.911163] CPUFREQ: Per core ondemand sysfs interface is deprecated - up_threshold
<6>[   12.911346] CPUFREQ: Per core ondemand sysfs interface is deprecated - sampling_rate
<6>[   12.911590] sr_vdd1_autocomp: Already set to 1
<6>[   13.065093] kjournald starting.  Commit interval 5 seconds
<6>[   13.066589] EXT3 FS on mmcblk1p7, internal journal
<6>[   13.066864] EXT3-fs: mounted filesystem with ordered data mode.
<6>[   13.101165] Running NetMUX
<6>[   13.114959] Inserting sec module
<6>[   13.132507] gannet_setup
<6>[   13.133666] gannet starting kernel thread
<6>[   13.133880] gannet initialized OK
<6>[   13.197601] SMC: SecureCRC=0x03E75215
<6>[   13.266998] SMC PA: INFO 00000001 00:00:00.000 ------ ------ ---------------- Booting... (t=14:04:25.555) SMC 2.7.0.24149     /HW Token Service Integrat
<6>[   13.285644] SMC PA: INFO 00000002 00:00:00.000 ------ ------ ---------------- ion
<6>[   13.301330] VPNClient built on Feb  1 2011 08:46:37
<6>[   13.387481] SMC PA: INFO 00000003 00:00:00.178 P-001D T-0030 IPRM decode ---- SSPICreate
<6>[   13.407531] SMC PA: INFO 00000004 00:00:00.203 ------ ------ ---------------- Booted
<6>[   13.650665] rmnet0: Disabled Privacy Extensions
<6>[   13.652801] rmnet1: Disabled Privacy Extensions
<6>[   13.666046] rmnet2: Disabled Privacy Extensions
<6>[   13.667755] rmnet3: Disabled Privacy Extensions
<6>[   13.669677] rmnet4: Disabled Privacy Extensions
<6>[   13.671386] psd_data10: Disabled Privacy Extensions
<6>[   13.673309] muxtest_net: Disabled Privacy Extensions
<3>[   13.812774] init: untracked pid 1180 exited
<3>[   13.818511] init: service 'console' requires console
<6>[   13.826324] warning: `adbd' uses 32-bit capabilities (legacy support in use)
<6>[   13.827026] enabling adb
<6>[   13.837829] adb_open
<3>[   13.863250] init: cannot find '/system/bin/catcommands', disabling 'catcommands'
<3>[   13.888946] init: cannot execve('/system/etc/install-recovery.sh'): Permission denied
<3>[   14.020538] init: cannot find '/system/bin/aplogd', disabling 'aplogd'
<3>[   14.021240] init: cannot find '/system/bin/dla', disabling 'dla'
<6>[   14.185577] cpcap spi2.0: CPCAP uC: open status:0
<7>[   15.066131] --------Audio Platform Config-------
<7>[   15.066162] Analog Downlink: false
<7>[   15.066162] Independent BT bus: false
<7>[   15.066162] I2S BP: false
<7>[   15.066162] 19Mhz BP: false
<7>[   15.066162] Mic3: false
<7>[   15.066162] MB_BIAS_R: 0
<7>[   15.066162] Stereo Loudspeaker: false
<7>[   15.067596] --------CPCAP register dump---------
<7>[   15.067718]  0x200 (512) = 0x75
<7>[   15.067718]  0x201 (513) = 0x0
<7>[   15.067749]  0x202 (514) = 0x0
<7>[   15.067749]  0x203 (515) = 0x0
<7>[   15.067749]  0x204 (516) = 0x0
<7>[   15.067749]  0x205 (517) = 0x0
<7>[   15.067749]  0x206 (518) = 0x0
<7>[   15.067749]  0x207 (519) = 0x0
<7>[   15.067749]  0x208 (520) = 0x0
<7>[   15.067749]  0x209 (521) = 0x0
<7>[   15.067779]  0x20A (522) = 0x0
<7>[   15.067779]  0x20B (523) = 0x0
<7>[   15.067779]  0x20C (524) = 0x0
<7>[   15.067779]  0x20D (525) = 0x30
<7>[   15.069519] -------End Audio Driver Dump--------
<6>[   15.069885] AUDIO_DRIVER:spkr1 = 0x0, spkr2 = 0x0
<7>[   15.349975] turning off regulator
<7>[   15.368530] turning off regulator
<7>[   15.385925] turning off regulator
<7>[   15.402435] turning off regulator
<7>[   15.408294] turning off regulator
<6>[   20.449859] Panel is turned on
<6>[   32.630157] request_suspend_state: wakeup (3->0) at 25449035609 (2011-02-20 14:04:44.987487709 UTC)
<7>[   33.384033] turning off regulator
<6>[   33.495910] TIWLAN: driver init
<6>[   33.496063] TIWLAN SDIO init
<4>[   33.496215] in sdio_init() sdcnum= 3
<4>[   33.496704] in sdioDrv_init(), before platform_driver_register(&sdioDrv_struct)
<6>[   33.497039] TIWLAN SDIO probe: initializing mmc3 device
<4>[   33.497375] Configuring SDIO DMA registers!!!
<4>[   33.497497] pdev->id is 2!!!
<4>[   33.516174] hPlatform_Wlan_Hardware_Init
<4>[   33.516479] wifi_add_dev
<4>[   33.516906] wifi_probe
<4>[   33.522583] wifi_set_power = 0
<4>[   33.522705] mapphone_wifi_power: 0
<4>[   33.540710] drv->irq = 225, 2
<4>[   33.746124] wlanDrvIf_Open
<4>[   33.746307] wlanDrvIf_Start
<6>[   33.962310] TIWLAN: 986.528823: pInitParams->RoamingScanning_2_4G_enable 1
<4>[   33.963348] wifi_set_power = 1
<4>[   33.963470] mapphone_wifi_power: 1
<4>[   33.985992] wifi_set_power = 0
<4>[   33.986114] mapphone_wifi_power: 0
<6>[   33.988281] input: sensors as /devices/virtual/input/input8
<4>[   34.013580] wifi_set_power = 1
<4>[   34.013702] mapphone_wifi_power: 1
<6>[   34.087524] TIWLAN SDIO sdioDrv_InitHw()!!SDIO clock Configuration is now set to 24Mhz
<6>[   34.088073] TIWLAN: 986.654617: CHIP VERSION... set 1273 chip top registers
<6>[   34.088989] TIWLAN: 986.655532: Working on a 1273 PG 2.0 board.
<6>[   34.089111] TIWLAN: 986.655654: Starting to process NVS...
<6>[   34.089324] TIWLAN: 986.655837: NVS found, EEPROM Image addr=0xce9cfc00, EEPROM Len=0x0x1d4
<6>[   34.089660] TIWLAN: 986.656203: Chip ID is 0x4030111.
<6>[   34.090209] TIWLAN: 986.656753: FEM Type 1
<6>[   34.090515] TIWLAN: 986.657058: Starting to download firmware...
<6>[   34.137115] TIWLAN: 986.703628: Starting to download firmware...
<6>[   34.145965] TIWLAN: 986.712508: Starting to download firmware...
<6>[   34.150817] TIWLAN: 986.717361: Starting to download firmware...
<6>[   34.158294] TIWLAN: 986.724807: Starting to download firmware...
<6>[   34.160003] TIWLAN: 986.726516: Starting to download firmware...
<6>[   34.160736] TIWLAN: 986.727279: Finished downloading firmware.
<6>[   34.160949] TIWLAN: 986.727492: Firmware running.
<6>[   34.203430] ADDRCONF(NETDEV_UP): tiwlan0: link is not ready
<6>[   34.206878] TIWLAN: 986.773391:
<6>[   34.207031] TIWLAN: 986.773574: --------------------------------------------------------------------
<6>[   34.207275] TIWLAN: 986.773788: Driver Version  : WiLink_Driver_6.1.0.0.131
<6>[   34.207489] TIWLAN: 986.774032: Firmware Version: Rev 6.1.5.44.24
<6>[   34.207611] TIWLAN: 986.774154: Station ID      : 40-FC-89-FC-36-F5
<6>[   34.207824] TIWLAN: 986.774367: --------------------------------------------------------------------
<6>[   34.207946] TIWLAN: 986.774490:
<6>[   34.238586] TIWLAN: 986.805099: Interrogate TX/RX parameters
<6>[   36.827209] ADDRCONF(NETDEV_CHANGE): tiwlan0: link becomes ready
<6>[   36.871582] TIWLAN: 989.438094: connInfra               , CONSOLE:************ NEW CONNECTION ************
<6>[   36.873504] TIWLAN: 989.440047: ************ NEW CONNECTION ************
<6>[   36.873626] TIWLAN: 989.440169: siteMgr                 , CONSOLE:-- BSSID = e8-39-df-d0-c0-46
<6>[   36.873931] TIWLAN: 989.440444: -- SSID  = SG1
<6>[   36.874023] TIWLAN: 989.440566: -- BSSID = e8-39-df-d0-c0-46
<6>[   36.874237] TIWLAN: 989.440780: connInfra               , CONSOLE:****************************************
<6>[   36.874511] TIWLAN: 989.441055: ****************************************
<6>[   43.859558] AUDIO_DRIVER:spkr1 = 0x20, spkr2 = 0x0
<7>[   47.071868] tiwlan0: no IPv6 routers present
<7>[   47.460449] turning off regulator
<6>[   51.193634] musb_pullup - Disabling USB Pullups
<6>[   51.298492] musb_pullup - Enabling USB Pullups
<6>[   51.408386] device_mode_change_write - Successfully enabled function - acm_eth_mtp_adb
<7>[   51.593383] turning off regulator
<6>[   51.647491] MUSB BUS RESET as b_idle
<6>[   51.727478] MUSB BUS RESET as b_peripheral
<6>[   51.758605] android_usb gadget: high speed config #1: android
<6>[   51.758789] usbnet_set_alt intf: 2 alt: 0
<7>[   51.759033] mtp_function_set_alt intf=3 alt=0
<3>[   51.797424] init: sys_prop: permission denied uid:2000  name:adb.connected
<7>[   55.635009] turning off regulator
<6>[   57.134277] SMC PA: INFO 00000005 00:00:43.928 P-0009 T-000B fileServer ----- Mounting partition 1...
<6>[   57.349792] SMC PA: INFO 00000006 00:00:44.140 P-0009 T-000B fileServer ----- File system mounted successfully in partition 1
<6>[   65.563873] overclock: Motorola Milestone/Droid/DroidX CPU overclocking version 1.4.7
<6>[   65.564178] overclock: by Tiago Sousa <mirage@kaotik.org>
<6>[   65.564300] overclock: found mpu_opps_addr at 0xc05cd6d4
<6>[   72.279937] overclock: setting max_rate 1000000 and max_vsel 44
<6>[   72.280151] overclock: cpufreq_stats_table address not configured, aborting action
<6>[   72.549713] overclock: setting max_rate 800000 and max_vsel 44
<6>[   72.549835] overclock: cpufreq_stats_table address not configured, aborting action
<6>[   73.141601] overclock: cpufreq_stats_table address not configured, aborting action
<6>[   73.636474] overclock: cpufreq_stats_table address not configured, aborting action
<6>[   74.218627] overclock: cpufreq_stats_table address not configured, aborting action
<6>[   76.502197] disabling adb
<4>[   76.502380] ------------[ cut here ]------------
<4>[   76.502655] WARNING: at /localrepo/hudsoncm/hudson_localroot/workspace/z_3.4.2_JDN-Daily-for-Jordan-tmo-rc2/kernel/kernel/mutex-debug.c:78 debug_mutex_unlock+0xac/0x118()
<4>[   76.502899] Modules linked in: overclock tiwlan_drv vpnclient kineto_gan sec modem_pm_driver netmux_linkdriver netmux
<4>[   76.504302] [<c003ad0c>] (unwind_backtrace+0x0/0xd8) from [<c0069468>] (warn_slowpath_common+0x48/0x60)
<4>[   76.504577] [<c0069468>] (warn_slowpath_common+0x48/0x60) from [<c008ac90>] (debug_mutex_unlock+0xac/0x118)
<4>[   76.504821] [<c008ac90>] (debug_mutex_unlock+0xac/0x118) from [<c0417508>] (__mutex_unlock_slowpath+0xb4/0x120)
<4>[   76.505004] [<c0417508>] (__mutex_unlock_slowpath+0xb4/0x120) from [<c0265fec>] (adb_enable_release+0x34/0x44)
<4>[   76.505249] [<c0265fec>] (adb_enable_release+0x34/0x44) from [<c00ca1c4>] (__fput+0x104/0x1fc)
<4>[   76.505523] [<c00ca1c4>] (__fput+0x104/0x1fc) from [<c00c6ff8>] (filp_close+0x6c/0x78)
<4>[   76.505798] [<c00c6ff8>] (filp_close+0x6c/0x78) from [<c006b184>] (put_files_struct+0x88/0xdc)
<4>[   76.506042] [<c006b184>] (put_files_struct+0x88/0xdc) from [<c006c9f4>] (do_exit+0x1b0/0x698)
<4>[   76.506195] [<c006c9f4>] (do_exit+0x1b0/0x698) from [<c006cf8c>] (do_group_exit+0xb0/0xdc)
<4>[   76.506439] [<c006cf8c>] (do_group_exit+0xb0/0xdc) from [<c0076cbc>] (get_signal_to_deliver+0x3c4/0x420)
<4>[   76.506713] [<c0076cbc>] (get_signal_to_deliver+0x3c4/0x420) from [<c00384a0>] (do_signal+0x68/0x650)
<4>[   76.506958] [<c00384a0>] (do_signal+0x68/0x650) from [<c0038aa0>] (do_notify_resume+0x18/0x5c)
<4>[   76.507110] [<c0038aa0>] (do_notify_resume+0x18/0x5c) from [<c0035f8c>] (work_pending+0x1c/0x20)
<4>[   76.507354] ---[ end trace fabdf3b94a9b9af3 ]---
<6>[   76.507629] adb_release
<3>[   76.515716] init: untracked pid 1952 exited
<6>[   76.542541] enabling adb
<6>[   76.550811] adb_open
<6>[   77.525268] musb_pullup - Disabling USB Pullups
<6>[   77.525756] usbnet_disable
<7>[   77.526031] mtp_function_disable(): disabled
<6>[   77.526824] adb_release
<6>[   77.527404] Sending USBLAN disabled uevent
<6>[   77.528259] adb_open
<6>[   77.634490] musb_pullup - Enabling USB Pullups
<6>[   77.743804] device_mode_change_write - Successfully enabled function - cdrom
<6>[   78.019592] MUSB BUS RESET as b_peripheral
<6>[   78.099395] MUSB BUS RESET as b_peripheral
<6>[   78.130432] android_usb gadget: high speed config #1: android
<6>[   79.608581] musb_pullup - Disabling USB Pullups
<6>[   79.608978] usbnet_disable
<7>[   79.609222] mtp_function_disable(): disabled
<6>[   79.610290] adb_release
<6>[   79.613891] adb_open
<6>[   79.712768] musb_pullup - Enabling USB Pullups
<6>[   79.822296] device_mode_change_write - Successfully enabled function - acm_eth_mtp_adb
<6>[   80.149780] MUSB BUS RESET as b_peripheral
<6>[   80.229614] MUSB BUS RESET as b_peripheral
<6>[   80.260467] android_usb gadget: high speed config #1: android
<6>[   80.260620] usbnet_set_alt intf: 2 alt: 0
<7>[   80.260864] mtp_function_set_alt intf=3 alt=0
<6>[   94.964477] binder: 1395:1516 transaction failed 29189, size 156-0
<6>[  161.126434] request_suspend_state: sleep (0->3) at 153945312458 (2011-02-20 14:06:49.362845197 UTC)
#


Add A Comment: