CopyPastehas never been so tasty!

Electric or Hydraulic Crane Remote Control

by baseremotes

  • 0
  • 0
  • 0

The modern crane remote control used in the industrial sectors greatly improves jobsite safety by providing the operator the safest vantages point for effective control of the crane. This is a one-man control radio remote system that eliminates the need of any second person stabilizing the load while guiding its placements. While using the system the operator has the simultaneous control to move around the work area while setting the load precisely into position.

The Electrical or Hydraulic crane control wireless remote controllers apply the latest innovation in the modern radio remote control technology. The system greatly reduces all types of risks during the function. It also provides great level of security while using for the large cranes.

The handheld transmitters are available with up to twelve radio remote control buttons. The remote control buttons are generally specified by the customer only. The transmitter of the crane remote control systems is very powerful and they can work within a great level of frequency. The frequency of these wireless remote controllers is between 902-928 MHz FHSS. Additional 433.92, 869.7 and 2.4GHz frequencies are also available. The transmitter can work within a transmitting range of 100mW. With the 56 bits DES encryption key method of transmission, the system can work better than the normal service cranes.

An internally protected on card PCB mount antenna is available in order to catch signals. However, there will be no visible antennas to damage. The normal range of the antenna is 500 feet. However you can get a ranging power up to 2000ft by using external antenna. Constructed in a rugged water resistant, impact resistant polycarbonate enclosure, the transmitter unit provides the best level of durability. The transmitter unit can also work better within a temperature specification within minus 20 F to 185 F. Normal double ‘A’ type battery is used as main power supply of the transmitter unit. The rechargeable battery can provide 30 hours of continuous use between charges. Audible low battery warning and flashing low battery indicator is also available. 12/24 VDC charger is available with the system.

Handheld receiver unit is another important section of the crane service wireless remote controllers. The frequency of the receiver unit is between 902-928 MHZ. Additional 433.92, 869.7 and 2.4GHz frequencies are also available. The operator can handle the unit by using 12/24VDC power supply. However, Optional 120VAC system is also available. While using in the service cranes, the receiver unit can take the current load Up to 4Amps @ 12VDC per channel or 10Amps DC per system total. High Current 30Amp "H" series receiver is also available for advanced crane remote control systems.

All the wiring connections are pre-wired to meet OEM requirements, quick connect fittings supplied. The programming methods include up to 12 programmable channels including: Latched, momentary, Enable and interlock modes.

BASE Engineering designs excellent crane remote control for different engineering and commercial purposes.  Since 1996 over 50,000 BASEsystems have been employed around the globe to increase job safety and productivity. As a result of this design effort we have the confidence to offer a four year, no hassle, and replacement warranty on every product we manufacture. Wireless remote controllers, in our hand, has moved into the next level.

Add A Comment: