CopyPastehas never been so tasty!

Maintenance of Aluminum Alloy Doors and Windows

by anonymous

  • 0
  • 0
  • 0
102 views

Tips for aluminum alloy doors and windows maintenance

Summer is coming, the household alliances need careful maintenance, or they will prone to generate adverse changes in the humid summer, affecting the lifespan. The aluminum alloy doors and windows also need to be taken good care of. There are 5 tips about your summer maintenance of aluminum windows and doors.


First, Placing aluminum alloy doors and windows lightly

Aluminum alloy doors and windows should be moved lightly when they are in use, let it push or pull naturally; Don't pull or push stiffly if you find there are problems, you should first remove the faults. Fouling and deformation are the main reason of aluminum alloy doors and windows to innovate difficult to pull, you should keep the door frame cleaning, especially the cleaning of the sliding slot. You can vacuum the fouling in the tank and door seal tops.
  
Second, notes for cleaning aluminum alloy doors and windows

Don't step on the aluminum frame or pull the box for support when cleaning aluminum alloy doors and windows. Use a soft cloth to moisten with water or neutral detergent, do not use ordinary soap or detergent, cannot use scouring powder, washing toilet fine strong acid cleaners.


Third, cleaning aluminum alloy doors and windows after rain

Dry the wet glass and door frames of aluminum alloy doors and windows after rain, you should pay specially attention to dry the chute water. The friction of chute increase after being used for a long time, you can add a little oil or coated it with a layer of fire wax.
  
Fourth, inspect aluminum frame joints

Aluminum frame joints for aluminum alloy doors and windows should be inspected regularly to tighten the bolt, replace the damaged parts. Axis positioning pin, wind bracing, floor spring and other vulnerable parts of the aluminum windows and doors should be frequently checked and regularly added with oil, keeping it clean and flexible.  


Fifth, Sealing tops and glass rubber seal is the key structure

Sealing tops and glass rubber seal is the key structure to ensure that doors and windows seal insulation, which needs to be promptly repaired and replaced if it is off. Regularly check the aluminum frame wall junction, if it is loose, it can easily make the whole framework deformed in the course of time, so that doors and windows cannot be closed or sealed. So the loosed screws at connection should be immediately fastened, if the screw footing is loose, it should be sealed by mixing epoxy superglue with a little cement.

Add A Comment: