Going to the bathroom for some plumbing work takes a lot of time. There are a number of pipes to look over for leaks or loose sections, and most often, skilled plumbers will do it for you. The overall condition of the entire grid will spell the difference between water savings and high expenses from unintentional water wastage.
Sometimes, it is not enough that the nuts and bolts are locked in tight. When the pipes are made to deal with big water surges everyday, the strain may worsen at the joint links themselves and trigger rust inside despite any special coatings put within. No matter how tight the pipes were screwed in, there's still a possibility that water may leak through the threading. In many cases, you would need to use silicon sealants to nip the problem in the bud.
The first thing to do is to ensure that the area around the affected pipe is dry before you start. Afterward, you will have to use a small knife and caper to gradually scrape away any existing sealants on the surface. A waste bag to store the old silicon is necessary; once all has been removed, use a clean rag to wipe off all moisture as well as any soap residue. Take care that the nearby surfaces are not scratched.
When you are ready to apply the fresh silicon sealant, consider masking off both sides of the area where the material will be applied. The product itself must be certified waterproof to effectively work and should be specifically designed for the material to be applied on. The sealant should be applied at a 45-degree angle and the stream must be continuous along the entire circumference of the joint. Be warned; some sealant products will have different viscosities and curing times.
In case silicon sealant technology does not quite do the job, you can go for anaerobic adhesive products. Anaerobic adhesives are special materials that are simply produced in liquid form. However, once they come into contact with metal ions, they harden in short order especially when the chemical is applied on a threaded assembly.
Silicon or anaerobic sealants have unique virtues you should consider when you are working in the bathroom. Careful planning and cleaning of the contact surfaces will extend their effectiveness. For more information, check out thetiledepot.co.uk/how-to/apply-silicone-sealant.
On Properly Using Silicon Sealants for Bathroom Work